Planning a custom home soon and want to integrate green features into it? If so there is a right way and wrong way to go about the entire process. Do it right, and you lessen your carbon footprint. Do it wrong and you contribute to the destruction of the polar ice caps. According to New home communities Big Lake MN experts, careful thought and consideration needs to be done from the foundation to the roof work and everything else in between. Here are some green recommendations you can put into your custom home.
Build only what you need
House that is too big with lots of unutilized space will of course cost more to maintain, heat and cool. All homeowners need to really examine the lifestyle they live when planning a custom home design to ensure only the most necessary features are included in the design no more, no less. Also in the same vein, planning ahead is also wise. If you have plans of having a family or take care of elderly relatives make sure to accommodate the necessary resources into place.
Choose the Correct Location
Location, location, location is a buzzword that people should never forget whenever they are looking for a place to live. If you are considering the environment, constructing a new home in the middle of a lovely countryside may upset the ecological balance in the area. It can displace local wildlife or eliminate them completely. Think before you construct.
What is a green home without solar energy? Not a green home. All green homes integrate solar energy at some degree or another. According to custom home builder Plymouth Minnesota by installing the front portion of the property due south, you instantly lower energy costs by as much as 10%. Place the majority of your windows on the south end and then install overhangs and awnings during the summer to shield from the hot sun. Use materials that absorb the heat of the sun and radiate it. Plant lots of trees near the property in order to establish a natural shade. Use skylights for natural light during the day.
When planning a custom home the floor plan is one of the most important things to do right. Many new homeowners make the mistake of not integrating their lifestyle into the plans and end up paying for costly renovations later on. Here are some tips to guide you when choosing a floor plan for your custom home.
Use Appropriate Architectural Features
Each new homeowner gets excited when looking at beautiful architectural features on a 2D floor plan. Expansive floor to ceiling windows for example or skylights can make any new homeowner’s heart flutter with delight. According to new home construction Otsego MN experts, these and other architectural features might look good from a design standpoint but may have an impact on the way the heating and cooling needs of your home. It may not be of too much concern now but you may also want to plan for your future living costs as well.
Appropriate Room Sizes
It is not uncommon for a new homeowner to discover that he bought furniture that did not fit in the dimensions of the room. It is for this reason that it cannot be over emphasized enough the need for measuring all your furniture specs to determine whether or not they can fit in any given room you prefer them to place. The last thing you need is a cramped living room where everyone trips on one another just to get from point A to point B.
Space is King
Many homeowners make the mistake of not imagining how their home would look like should there be a lot of people in it at a given time. This of course depends on the lifestyle you need so if you like entertaining you need to imagine how your house would look like when it is filled to capacity. This will ensure that people do not feel cramped and there is enough space to eat dance, talk and converse. Safety first
Custom home builder Zimmerman Minnesota experts recommend putting safety as top priority when designing a floor plan for your custom home. Ensure that it is kid or elderly friendly is always a wise choice regardless of what lifestyle you lead.
According to new home construction Elk River MN experts, a lot of homeowners often select the wrong floor plan initially because they tend to emphasize more on look rather than practicality and functionality. Here are some helpful tips to help you avoid some of the most commonly seen mistakes.
Never Assume Each Floor Plan is in tune with your lifestyle
Many custom homeowners make the mistake of not picturing their own family cooking in the kitchen or not even considering the implications of putting 2 or 3 flights of stairs that they will have to manage a few times each day. This is why it is important to talk to a professional builder such as the people from custom home builder Blaine Minnesota so homeowners can be guided on how to choose the right floor plan that will fit their needs and lifestyle. Before talking to a builder assess yourself. Do you prefer a single story or a multipurpose home? Is an open floor plan better or would you prefer more privacy with the integration of partitions? Know what you need and balance it with your wants.
Avoid the Upgrades for Now
If you are planning a custom home and are shopping around for ideas chances are you are looking at developer’s model homes for inspiration. One of the most common mistakes is to get hooked on the upgrades that they showcase. At this point you do not need to focus on those. Instead, do away with the finishes, the carpeting and the drapery and instead try concentrate first on the layout and flow. By doing so you will be able to make a better decision on what floor plan is best rather than creating a floor plan based on the upgrades you want.
Know Floor Plan Drawings
Unless you are an architect, chances are looking at floor plan drawings may seem like looking at an alien drawing. Symbols and nomenclature can sometimes get confusing so it is important that you do not assume what each window stair, door and multi-story space looks like when presented with a floor plan. Don’t be shy about not understanding them. Talk to your builder so he can explain this stuff for you.
The interior design of your custom home literally can make or break it. Most custom homes are bare so homeowners are usually in a scramble to fill it up with furniture. However, poor choices lead to a poorly organized and clutter prone space. Here are some interior design suggestions to consider for your custom home.
Pick Paint Colors First
According to home builder Plymouth Minnesota experts, when designing a custom home it is important that you select your paint colors first before your furniture. The reason for this is it will be quite difficult to match furniture to an already painted wall than the other way around. It is recommended to start with the sofas by bringing along some fabric swatches to the paint store in order to help with the palette selection. You may want to bring several paint swatches home and test it in the area you want. Do test out several shades of your preferred color on the walls before letting the contractor begin the work. While it is true that paint swatches are accurate, the natural lighting at different times of the day is another and will affect the wall colors. Leave the paint swatches on for at least 24 hours before you select the final one.
If you have a custom home, chances are you might try to splurge on your furniture thinking a brand new house will require all brand new furnishings. While this is true at some point it is not mandated that you buy everything all at once. Do make out a budget and stick with it. Remember that a well-decorated room is not made overnight so it is ok to go slow and build your collection.
Showcase your Windows
According to new home construction Maple Grove, it is always a good thing to get as much natural light as possible to fill a room, as there is nothing that looks drab than a room that lacks the proper lighting. Low hanging curtain rods are a mistake, as these should be hung as close to the ceiling so as to establish a sense of height. Rods that are hung too low are also a problem because they make the ceiling look lower than it actually is and the room smaller.
Never back furniture against the Walls
By far, this is the most common mistake a lot of new homeowners make. What you should do however is to push your furnishings together in order to establish an intimate setup that is perfect for conversation. By doing so you will establish a flow that will allow people to move about freely.
If you are planning a custom home, the right interior design choices can take it to the next level while the wrong one may make your home look like a cookie-cutter mistake. According to homebuilder Plymouth MN expertsa few small tweaks to your space can make all the difference. Here is how to establish a sense of balance and order in your custom home.
Avoid Over Furnishing
If you have a custom home chances are you would like to spend an arm and a leg to furnish it so that it would not look bare. Unfortunately, too much stuff can instantly lead to clutter and can transform a room from a well planned and thought out space to something that looks a lot like a dumping area of collected furniture. The furniture you choose should fill the space and create something that is not just appealing but functional as well. Do not forget that there should be enough space in the room for movement and allow people to walk about without feeling claustrophobic from all the furnishings.
If it does not fit don’t Use It
A common mistake of new homeowners is to try and use old furniture from their previous home but unfortunately if they lived in a condo and are just transferring to a custom home chances are they have smaller furniture. Furniture that is either too small or too large can make any room in your house look awkward and unbalanced. New home Plymouth Minnesota recommends measuring your existing furniture or those that you intend to purchase to ensure they fit in the new space properly.
Avoid Poor Lighting
In any home whether it be custom-made or not lighting is key to tie all the elements together. It is recommended to have as much natural light as possible. Never try to block natural light sources with poorly placed curtains and other accessories. To enhance natural light, place mirrors directly across your source so as to allow the light to bathe the room.
Odor emissions are a major health concern that methane producers need to address as the noxious smells from agitation and land application of anima waste products occur during the process of storage and extraction. The use of cover systems while not perfect offers a win-win solution to reduce emissions and keep it from going to nearby residential areas.
Cover systems may either be permeable which allow gases to escape or impermeable or those that do not allow the gas to dissipate. Methane producers use different kinds of covers for different purposes. The most popular cover system are permeable floating covers like geotextile or straw. More often than not, natural crusts develop on dairy manure storages and therefore maybe classified as a form of permeable cover. Impermeable plastic covers are also used a lot in farms and may either be negatively pressurized or inflatable. Most cover systems have a lifespan of about a decade. However, there are reports of cover failure from as early as one year of use. The average for many covers is four years. Compared to plastic covers, geotextile covers have a lessened life expectancy and some do not have any protection from ultraviolet radiation which in turn causes greater deterioration and therefore reduced life expectancy.
This of course depends largely on which type of vendor however plastic cover vendor normally offers warranties of up to ten years but for workmanship it does not usually extend to more than two. For geotextile vendors, warranty on the material may be up to three years but workmanship is usually limited to a year. According to floating tank cover experts, if the cover is likely to fail as a result of workmanship, it usually happens within the 1st year of use.
They feature tightly sealed storage edges. It is important to note that provisions for the collection and removal of rainwater should be considered especially in areas where there is low evaporation but high precipitation. The runoff that collected from the cover could be drained via a series of perforated collection pipes established on the surface of the cover, these are in turn connected to a pumping system that is manually activated. Due to their impermeable nature, they will require some form of exhaust ventilation in order to prevent pressure from building up inside as a result of manure gas production. Facilities to collect and remove methane may be done through the installation of perforated gas collection pipes or exhaust fans during installation.
Water is the world’s most precious natural resource without it life as we know it would cease to exist. In areas where there is a large amount of water loss due to arid weather conditions, there is a real need to protect the existing water supply to ensure survival. There is a myriad of water conservation methods available out there however, the best solution for open ponds, lakes and tanks is through the use of floating covers. Here is how.
How it Works
Floating covers are basically geomembranes created from sturdy plastic geotextile materials. As the name suggests, floating cover systems float on the surface of the water and therefore prevents evaporation from occurring by stopping dry air from getting into contact with the pond, reservoir or open tank system.
Floating covers also reflect a part of the incoming solar radiation and act as a barrier to the passage of vapor. Moreover, floating pond covers can also stop evaporation from wind and is therefore considered an effective means of water conservation in open systems like ponds etc.
Many floating cover systems may be made up using black or white reinforced polyethylene with black on one side and white on the other. White floating covers are effective in the summer months or in areas like hot desert climates. It is effective because it keeps the temperature down and minimizes radiation by reflecting sunlight as opposed to letting it be absorbed.
In an open water setting such as ponds, storage tanks or irrigation water sources, further evaporation can be reduced depending on the kind of material used. The system works best if the material is made with a low transmission ratio, as well as with high reflection and absorption ratios.
Aside from preventing evaporation, floating cover systems also reduce gas emissions from lagoon systems which in effect reduces odor emissions that can be harmful to both animals and plants.
Floating covers are an effective means of conserving water in an open water setting especially in climates that are drought-ridden. It is important therefore to select a system that is best suited for the environment for which it will be used to achieve maximum effect.
While it is true that protection from the external environment to prevent evaporation or to keep odors and other noxious gases in are considered top considerations when looking for a geomembrane for your open water system, chemical resistance is also another important factor to consider. It is essential that the geomembrane you ultimately select is sturdy enough to the point that it will not degrade from contact with the substance.
According to modular tank covers experts, geomembranes offer a variety of containment uses and therefore with each application a specific set of requirements for them. Chemical resistance is one of the most important features to consider especially if you are looking to contain gases within. It is important that you look to a reliable provider that offers top of the line geomembranes that are certified to be durable against a host of volatile organic compounds. Chemical resistance is considered a top priority especially in the gas and mining industries.
The number one factor that is given credence in this case is protection from the possibility of deterioration. If you know how difficult it is to look for locations that are far away from residential communities you will know how important it is to ensure that your lagoons, ponds and irrigation ponds are safe from leaking noxious chemicals.
Chemical and corrosion resistance liners or cover systems ensure the safety and quality in applications where concern for the environment is considered a very high priority. Having good chemical resistant properties on your system will keep your costs down in the long run as the buff will increase its lifespan and prevent early deterioration which usually occurs during the 1st year of use. This feature is of paramount importance especially if there are harmful chemicals that may seep into groundwater if allowed to leak.
What to Select
According to floating tank cover experts, both reinforced ppolyethylene as well as reinforced polypropylene have very good chemical resistant properties. This makes it ideal for many chemical containment applications. For example, RPP liners normally has a wide spectrum of chemical resistance and are therefore indicated for applications where there is a potential of leaking into precious natural water sources.
Methane gas is produced from the anaerobic degradation of organic compounds. It is a greenhouse gas that if properly utilized can help save the environment instead of contributing to its demise. It comes from the manure of livestock and other animals and is also available in huge amounts deep in the earth. Here is why recovering methane gas is good for the environment.
According to lagoon covers experts the collection of biogas can prevent methane from going into the environment and turning into a greenhouse gas. Biogas can create heat and electricity and therefore can reduce the operating cost of a farm and the surplus may be used to power a small town or city. Using biogas may minimize the need for other fuels. This means lesser pollution from mining, drilling, burning and transporting. Using it also reduces the amount of carbon dioxide in the atmosphere an important factor in climate change.
How to Recover Methane Gas
According to gas collection covers experts a practical way of harvesting methane gas is via the installation of an anaerobic digestion system. This approach is beneficial to the environment because it uses methane as electricity which lowers energy cost as well as reduce odors and improve the handling of manure in a farm setup. Moreover, using one also minimizes the risk for groundwater and surface contamination.
Kinds of Digesters
Covered Lagoon Digester
This is mainly used on large-volume, liquid manure lagoons which have less than 2% solids. In order for the methane to be collected, a floating lagoon cover is necessary as well as a gas pump. It can be used for dairy and swine operations and is ideal in areas where manure is handled as a liquid. Among the different systems available this is the simplest and cheapest one. However, it is not recommended for use in cold temperate zones.
This is used for ruminant animal manure that features 11% to 14% solids. The plug goes through the digester in 15 to 20 days and features only few moving parts.
Complete Mix Digester
This is essential for manure with 2% to 10% solids. A mixing system will keep the solids in suspension which will speed up the process of digestion. They cost more to build and operate than lagoon digesters.